Every sanitizing job includes the full sequence: camera inspection, negative air containment, mechanical cleaning, EPA-registered sanitizing fog, and a verification walkthrough with photos. Add-ons like coil cleaning, dryer vent cleaning, and furnace cleaning are quoted separately so you only pay for what your system needs.
We run a duct camera through the main trunk and every branch before we start. You see the screen. We document mold growth, disconnected joints, torn flexible duct, and pest debris. The scan takes 20 to 30 minutes and tells us whether sanitizing alone will hold or whether a section needs replacement first.
A negative air machine ties into the main trunk and exhausts through a HEPA filter to the outside. This keeps every particle we disturb from drifting into your living space. It is the same containment principle used on abatement jobs, and it is why you will not see a dust cloud in your hallway.
Rotary brush and air whip work every branch line. A compressed air nozzle reaches the corners a brush cannot. We HEPA-vacuum the plenum, the return drops, and the register boots. This stage takes 90 minutes to three hours depending on how many runs the house has and how much buildup is in them.
We fog the entire system with an EPA-registered sanitizer using a duct fogger. The fog reaches the coil, the plenum, and every branch. We let it dwell for the full contact time on the label, then run the blower to clear the lines. No fog-and-go shortcuts.
We re-run the duct camera after sanitizing to confirm the walls are clean and the sanitizer reached the far ends of the system. You get before-and-after photos in your file. Useful for warranty claims, real estate closings, and rental documentation.
Air duct sanitizing services Murphy TX is a deep-clean and treatment process that removes dust, mold spores, and organic buildup from your ductwork, then applies an EPA-registered sanitizer to the cleaned surfaces. It is not a spray-and-go job. We run a duct camera through every trunk and branch first, HEPA-vacuum the loose debris, scrub the walls with a rotary brush and air whip, then fog the system with a duct fogger. The sanitizer reaches the coil, plenum, and every branch line.
Murphy sits in Collin County where summer humidity runs 60 to 70 percent for months, and that moisture feeds mold growth in ductwork. Add cedar and ragweed pollen from March through November, plus the pet dander that comes with the neighborhood's dog-and-cat households, and you get the musty odors and allergy flare-ups we hear about every week. If you have been searching for air duct sanitizing services Murphy TX near me, the smell from your vents is the tell.
Every job follows the same sequence, whether it is a 1,800-square-foot house in Timber Creek or a 4,000-square-foot build in The Reserve. Here is exactly what you see from the driveway to the final walkthrough.
Schedule
Call or book online — a real human picks up and confirms a 2-hour arrival window.
Diagnose
Licensed tech inspects on-site, then walks you through the cause and your options.
Fix
The job is completed to code and done right the first time — no shortcuts, no surprises.
Guarantee
Every job backed by a written workmanship warranty — and we stand behind it.
Negative air machine
Ties into the main trunk and exhausts through a HEPA filter to the outside. Keeps every particle we disturb out of your living space during cleaning.
HEPA vacuum
Captures fine dust, dander, and mold spores at 99.97 percent efficiency at 0.3 microns. The backbone of source removal in every Murphy job we run.
Rotary brush and air whip
Rotary brush scrubs the duct walls; air whip flushes loose debris toward the vacuum. Together they get the buildup off sheet metal and flexible duct that vacuum alone cannot reach.
Duct camera
Lets us see inside every run before and after cleaning. You see the screen with us. Documentation goes in your file.
Duct fogger
Applies EPA-registered sanitizer as a fine fog that reaches the coil, plenum, and every branch line. We let it dwell for the full contact time on the label.
Compressed air nozzle
Reaches the corners and register boots a brush cannot. Used after the rotary brush pass to flush remaining debris toward the vacuum.
Rotobrush and Nikro equipment
Our primary cleaning rigs. Rotobrush handles residential runs; Nikro covers larger commercial trunks. Both are maintained and filter-checked before every job.
NADCA ACR 2021 standard
The industry standard for air systems cleaning, published by the National Air Duct Cleaners Association. It requires source removal before any chemical treatment, documented before-and-after conditions, and verification. We follow it on every Murphy job, residential or commercial.
Source removal before sanitizing
Sanitizer sprayed over dirt does nothing. We remove the dust, mold, and debris mechanically first, then apply the sanitizer to a clean surface. This is the sequence that makes sanitizing actually work, and it is why we do not offer fog-only service.
EPA-registered sanitizer at full dwell time
We use EPA-registered products at label dilution and let them dwell for the full contact time before running the blower. No fog-and-go. For Murphy families dealing with mold growth or pet dander, that dwell time is the difference between treated and clean.
Containment-first setup
Negative air containment goes up before any cleaning starts. This is the same principle used on abatement jobs and it is why you will not see a dust cloud in your hallway. It also protects your HVAC equipment from debris pulled back through the system.
01
What we do: We run the camera scan first to see what 14 years of buildup looks like. Then we clean every run, sanitize the system, and clean the coil. We document the before-and-after for your records in case you need it for warranty or resale.
→ You move into a house that smells clean and does not puff dust every time the AC runs. Most customers say the difference is obvious on day one.
02
What we do: We target the pollen and mold spores sitting in the return plenum and branch lines. HEPA filtration throughout, then an EPA-registered sanitizer at full dwell time. We also check the filter MERV rating and recommend the right one for your system.
→ Indoor air stops triggering symptoms the way it did before. Murphy customers with cedar and ragweed allergies see the biggest change in March through May.
03
What we do: Drywall dust and sawdust get pulled into the return during demo and finish work. We clean the return drop, the trunk, and every branch, then sanitize to clear the fine particulate the vacuum cannot catch.
→ The first cooling cycle after the remodel does not blow construction dust through the house. You can run the AC without a white film settling on the counters.
04
What we do: We camera-scan, clean the runs, sanitize with an EPA-registered product, and clean the coil. We provide camera documentation and a written summary for the tenant file.
→ The unit is ready to show without the previous tenant's pet smell. Property managers use our documentation to close out the deposit and start the next lease clean.
Murphy sits in Collin County where summer humidity runs 60 to 70 percent for months and cedar pollen loads the air from December through February. That combination feeds mold growth in ductwork and pushes allergen particles deep into flexible duct. Most of the housing stock here was built between 2000 and 2020, so the duct systems are 6 to 26 years old and many have never been serviced. We see the same pattern in neighborhood after neighborhood: dust in the return plenum, mold on the coil, and pet dander matted against the branch walls. If you have been looking for duct sanitization in Murphy Texas, the humidity and pollen are usually why. We schedule around the seasons. Spring and fall are our busiest windows because that is when allergy symptoms spike. Summer calls come in when the AC runs nonstop and the musty smell gets worse. Winter calls are usually about furnace dust after the first cold snap. Whatever the season, we run the same NADCA ACR 2021 sequence and document the work on camera.
Timber Creek
Mostly 2000s builds with original flexible duct. We see mold growth on the coil and dust in the return plenum on nearly every job here.
The Reserve
Newer construction with two-system layouts. Post-construction dust is common on first-year homes. We clean before move-in when possible.
Maxwell Creek
Larger homes with long trunk runs. Airflow imbalance between upstairs and downstairs is a frequent complaint. Cleaning and sanitizing helps even it out.
Murphy Village
Older housing stock with some retrofitted ductwork. We camera-scan carefully here because disconnected joints are more common than in newer neighborhoods.
Willow Wood
Family-heavy neighborhood with a lot of pets. Pet dander buildup in return drops is the most common issue we find on the first visit.
Summer humidity at 60 to 70 percent for months
Feeds mold growth in duct insulation and on the evaporator coil. Sanitizing without cleaning the coil first will not hold. We always treat both.
Cedar and ragweed pollen from December through November
Pollen gets pulled into the return and settles in the branch lines. HEPA vacuuming and sanitizing removes the reservoir that triggers indoor allergy symptoms.
Housing stock built 2000 to 2020
Most Murphy duct systems are 6 to 26 years old. Many have never been serviced. First-time cleaning typically pulls more debris than a home that has been on a maintenance schedule.
Two-system layouts in larger homes
Upstairs and downstairs systems need separate cleaning and sanitizing. We schedule both in one visit so you are not paying two trip charges.
Most Murphy calls come down to four complaints: dust from the vents, a musty smell, allergy symptoms that spike indoors, and higher electric bills. Each one traces back to something in the ductwork. Here is what we find and how we fix it.
Problem
Dust settles on every surface within hours of cleaning, and the air handler pulls it back through the return. The cycle repeats until the duct walls are cleaned.
Our Fix
We HEPA-vacuum the return plenum and every branch, then brush the duct walls with a rotary brush and air whip. Once the source is removed, the dust load in the airstream drops. Most Murphy customers notice less surface dust within a week.
Problem
That wet-cardboard smell is mold growth in the duct insulation or on the evaporator coil. Left alone, it spreads through the system and into every room.
Our Fix
We camera-scan to locate the growth, clean the affected runs, treat them with an EPA-registered sanitizer at full dwell time, and clean the coil with coil cleaner. Removing the food source is what stops the smell from coming back.
Problem
Dander and fur mat against the duct walls and become a food source for mold. Households with allergies feel it first, especially in bedrooms closest to the return.
Our Fix
We pull the matted hair off the duct walls with a rotary brush and air whip, then sanitize to neutralize the dander proteins. Murphy households with multiple pets often need this every 18 to 24 months.
Problem
Dirty ducts raise static pressure, so the blower runs longer to move the same air. In a Texas summer, that shows up as 10 to 20 percent higher cooling costs.
Our Fix
Cleaning and sanitizing the system drops static pressure and lets the blower move air the way it was designed to. We measure airflow before and after so you can see the change. Pairing with coil cleaning gets the biggest gain.
Sanitizing your ducts does four things that show up fast: cleaner air, lower dust load, no more musty smell, and a system that moves air the way it was designed to. Here is what Murphy customers notice in the first week.
Fewer allergy flare-ups
Pollen and dander that sit in flexible duct get stirred into every room each time the blower runs. Once we HEPA-vacuum and sanitize, that reservoir is gone. Customers with kids who wheeze through cedar season in Murphy tell us the difference shows up within three to five days.
No more musty odors
That wet-cardboard smell from a vent is mold growth in the duct insulation or on the coil. Duct disinfecting Murphy removes the colony and the food source it was living on. We treat the coil with coil cleaner at the same time so the smell does not come back next cooling season.
Lower dust on every surface
A dirty return plenum dumps dust into the airstream every cycle. After sanitizing, most Murphy homes report noticeably less dust on furniture and ceiling fans. One customer in Maxwell Creek said she went from dusting twice a week to once every ten days.
Better airflow, lower bills
Restricted ducts make the blower work harder and run longer. Cleaning and sanitizing a clogged system can drop static pressure enough to shave real minutes off each cooling cycle. In a Texas summer, that shows up on your electric bill by August.
Google ★★★★★4.9
PureBreeze Path sanitized our ducts after we found mold in the return. They showed us the camera footage before and after and cleaned the coil at the same time. The musty smell is gone and my wife's allergies have been much better. Fair price, no upsell, showed up on time.
Yelp ★★★★★4.8
Booked the same-day slot for a rental turnover in Murphy Marketplace. They handled the unit in about three hours and gave me camera documentation for the tenant file. Clean work, professional crew, and the price matched the quote exactly.
BBB ★★★★★4.9
We had 18 years of dust in our Timber Creek home and never had the ducts serviced. PureBreeze Path pulled out more than I expected and sanitized the whole system. The difference in airflow at the far registers was obvious. Would use them again.
Google ★★★★★5.0
Called about a musty smell in the hallway. They ran a camera through the ducts and showed me the mold growth on the screen. Cleaned it out, fogged the system, cleaned the coil. Smell was gone the next day. Straight answers on the phone and honest pricing.
Real answers to the questions we hear most often from local homeowners and property managers.
Local air duct cleaning is the mechanical work that comes before sanitizing. We HEPA-vacuum and brush every run, then fog the system. Most Murphy customers book both together because the sanitizer only works on a clean surface. One visit, one invoice.
View local Airduct cleaningIf you searched air duct cleaning near me, you are probably in Murphy or a neighboring Collin County town. We cover 75094 and the surrounding ZIPs. Same trucks, same technicians, same camera documentation whether you are in Murphy or Wylie.
View Airduct cleaning near me24/7 air duct cleaning matters when a water leak or rodent problem dumps debris into your ducts overnight. We take after-hours calls for Murphy customers who need the system cleared before the next cooling cycle. Call (855) 948-0345 any time.
View 24/7 Airduct cleaningSame day air duct cleaning is available most weekdays if you call before noon. We keep two afternoon slots open for Murphy and the Parker Road Corridor. Useful for move-ins, real estate closings, and rentals turning over between tenants.
View Same Day Airduct cleaningEmergency air duct cleaning covers the calls that cannot wait: sewage backup into a return, smoke odor after a kitchen fire, or a rodent infestation in the ductwork. We prioritize Murphy addresses and get a technician out the same day whenever possible.
View Emergency Airduct cleaningCommercial air duct cleaning for Murphy offices, retail spaces, and restaurants along Murphy Marketplace. We work after hours so your business does not lose a day. DuctSox fabric runs and sheet metal trunks both get the same source-removal treatment.
View commercial Airduct cleaningCall (855) 948-0345 or email info@purebreezepath.com and we will get back to you fast. Our phones are answered 24/7 for emergencies, and regular scheduling runs Monday through Friday, 8 a.m. to 6 p.m. If you are in Murphy, we can usually get a tech to your door the same day.
Phone
(855) 948-0345Address
410 W Farm to Market 544, Suite 102 Murphy, TX 75094 USA, Murphy, Texas
Hours
Mon–Fri: 7AM – 7PM
Sat: 8AM – 4PM
Sun: Emergency Only
24/7 Emergency Available
